OPTIC NOT INCLUDED
State of the art Trijicon MRO mount.
Designed for shooters who want the lightest, strongest, and least obtrusive quick-detach optic mount possible.
The Leap Mount returns to zero on every re-installation, and holds zero under the heaviest recoil. Guaranteed.
LIGHT MADE RIGHT:
Engineered to be the lightest Trijicon MRO QD mount, without compromising an ounce of strength.
The Leap is the strongest Trijicon MRO Quick-Detach mount we've ever tested.
We put a variety of QD mounts on a digital test stand, capable of exerting up to 1500lbs of force, and analyzed load versus displacement data for each. We then used everything we learned from these tests to refine our original design, culminating in the Leap; a quick-detach mount that is both the lightest and strongest on the market today.
A highly efficient clamp design guarantees precise operation and unprecedented rigidity: It features an oversize hooded thru-hole to buttress the thumbscrew's shank, which is the maximum possible diameter to fit a Picatinny channel.
A pair of hardened steel precision ground pins is press fitted to the clamp and act as guides. During it's development, the Leap mount was subjected to dozens of stress tests before a single prototype was ever made. Finite Element Analysis (FEA) helped extract every bit of performance from every gram of material. This cutting edge design process has resulted in the most efficient mount design possible.
Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.
Smooth is Fast:
As narrow as a bolt-on mount: the Leap has no protruding levers or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
Quantum Quick-Detach Mechanism:
The Scalarworks Quantum™ Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail. By decoupling torque from vibration resistance, the Quantum™ QD mechanism is intuitive, fast, and self adjusting, all without needing an imprecise knob or obtrusive lever to keep it from shaking loose. The Quantum™ QD's recessed head is carefully designed to deflect external impacts, while letting you take the mount off in under 3 seconds, with or without gloves.
The Leap mount is the most deliberate evolution of our original Low Drag Mount design.
From it's introduction in 2014, the original Low Drag Mount featured our recoil proof Quantum Quick-Detach mechanism, a precision telescoping clamp with world class return-to-zero, and a CNC milled base with the industry's highest strength-to-weight ratio, all while being as low-profile as a fixed bolt-on mount.
In 2015, the second generation Low Drag Mount became the first Quick-Detach mount ever to be CNC milled from 7075-T6. It's external edges were rounded to minimize stress risers, the thumbscrew was Black Nitrided, and a pair of integral shear lugs was added to the clamp to further improve lateral impact resistance.
Today, the Leap mount features a re-engineered base with a forward lean to provide more room for magnifiers, and chamfered side pockets for improved thumbscrew access. The re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail.
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Black Oxide
CENTER HEIGHT OVER RAIL 1.42" (36mm) / 1.57" (40mm)
WEIGHT: 1.41oz (40.0g) / 1.45oz (45.0g) + 0.06oz (1.8g) SCREWS
ORIGIN: United States of America
FIREARMS: Any equipped with MIL-STD-1913 Picatinny Rail
OPTICS: Trijicon MRO, MRO Patrol
• Scalarworks Leap™ mount
• Nylok® treated sight screws.
• 3/32" Hex driver bit.
• Leap™ user manual.