Phone: (916) 670-1103  |  Email: sales@cstactical.com


Products 37-48 of 85
Show
American Defense T1L Mount American, Defense, T1L, Mount, Lightweight, quick-detach, T3, mil-spec, anodized,Aimpoint, Micro, hardcoat,
Price: $74.50
Availability: CALL FOR AVAILABILITY | (916)-670-1103
American Defense Item #: ADM-T1-L -

    American Defense T1L MountAD-T1-LLightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx screws for a tight hold under heavy recoil. SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31" (7.8mm). Fits Aimpoint Micro series red dot sights only. ...

    ARC M10 QD-L Scope Mount
    Price: $300.00
    Availability: In Stock
    American Rifle Company

      American Rifle Company’s M10 QD-L is designed for use with rifles having full length rails.Mount height is the distance from the top of the rail to optical center and is defined at the center of the aft ring.Each clamp is 21mm (0.83") in width.Inside distance between clamps is 69mm (2.717"). Outside distance from clamp to clamp is 111mm (4.370").Proudly engineered and manufactured in the USA. The M10 QD-L features two innovative spring-loaded, pivoting rail clamps. Due to the high placement of...

      ARC M10 Scope Rings
      Price: $180.00
      Availability: In Stock
      American Rifle Company

        Diameter: - 30mm- 34mm- 36mm Heights: - 24mm (Low)- 28mm (Medium)- 32mm (High)- 36mm (X-High) American Rifle Company M10 Scope Rings American Rifle Company’s M10 Rings represent the standard against which other rings are measured.Scope ring height is from optical center line to top of rail.Each ring is 21mm (0.83") in width.Proudly engineered and manufactured in the USA. Even under the heaviest recoil, M10 Rings hold firmly without marring or indenting the scope. These uniquely split...

        Burris AR-P.E.P.R QD Mount 1 inch Burris, AR-P.E.P.R, QD, Mount, 1, inch, 1in, 1", 410344, Optics, Shooting, Military, Law, Enforcement, Rifle, Matte, Black, Cs, Tactical,
        Price: $100.00
        Availability: CALL FOR AVAILABILITY | (916)-670-1103
        Burris Item #: BRS-410344 -

          Burris AR-P.E.P.R QD Mount 1 inchBRS-410344AR-P.E.P.R. QD MountThe new AR-P.E.P.R. QD Mount makes it easy to gear up for different applications or shooting disciplines. Two Quick Detach levers make it easy to change optics or switch to iron sights and still maintain return-to-zero reliability. Mount Weight A B C D E 1 inch 8.3oz 1.0" 1.60" 2.44" 4.17" 2.15" ...

          Burris AR-P.E.P.R. Mount 30mm burris, ar, pepr, mount, 30, mm, tops, ring, oz, weight, unit, tough, stock, single, scope, riflescopes, proper, positioning, position, platform, picatinny, mounting, milled, forward, feature, eye, currently, combat
          Price: $78.00
          Availability: Out of Stock
          Burris Item #: BRS-410341 -

            Burris AR-P.E.P.R. 30mm MountBRS-410341Proper Eye Position Ready for combat riflescopes, this mount provides 2" of forward scope positioning on the M-4 and AR-15 platform. Ring bases are milled as a single, tough unit, and ring tops feature Picatinny tops for mounting additional accessories. Weight A B C D E 1" 8.3 oz. 1.0" 1.60" 2.44" 4.17" 2.15" 30mm 8.7 oz. 1.0" 1.75" 2.67" 4.17" 2.15" ...

            Desert Tech 34mm 30 MOA Scope Mount Desert, Tech, 34mm, 30, MOA, Scope, Mount, SR.BB,
            Price: $357.70
            Availability: CALL FOR AVAILABILITY | (916)-670-1103
            Desert Tech Item #: DTA-SR-BB -

              Desert Tech 34mm 30 MOA Scope MountDT-SR-BBThis Desert Tech mount has 34mm rings and 30 MOA tapers. These scope mounts were designed to provide proper cheek weld positioning on all Desert Tech rifles. ...

              GDI CM7-OSM  (Optical Sight Mount)
              Price: $210.00
              Availability: Out of Stock
              Global Defense Initiatives Item #: GDI-CM7M -

                Global Defense Initiatives CM7-OSM (Optical Sight Mount) CM7MM4 / M16 / AR Compatible Lower 3rd Co-witness: Front sight post tip in lower 3rd of sight picture ...

                GDI CMC5-OSM™ (Optical Sight Mount) Global, Defense, Initiatives, CM5-OSM, Optical, Site, Mount,
                Price: $210.00
                Availability: Out of Stock
                Global Defense Initiatives Item #: GDI-CM5-OSM -

                  Global Defense Initiatives CMC5-OSM (Optical Site Mount)    CM5M   M4 / M16 / AR Compatible Standard Co-witness: Front sight post tip in-line w/ red dot reflex sight   ...

                  GDI G1-SOM M14/MIA Mount MIL-STD and ACOG Compatible GDI, G1-SOM, M14, MIA, Mount, MIL-STD, ACOG, Compatible, global, defense, initiatives,
                  Price: $480.00
                  Availability: Out of Stock
                  Global Defense Initiatives Item #: GDI-G1OSMSS3 -

                    Global Defense Initiatives G1-SOM M14/MIA Mount MIL-STD and ACOG Compatible G1OSMSS3 The G1-OSM Gen3 M14/M1A optic mount allows the user to co-witness iron sights without removing the rear aperture, as well as the ability to provide the proper eye relief required for both M1913 Picatinny rail compatible scope rings, in addition to Trijicon ACOG scopes without the need for additional adapters.The G1-OSM Gen 3 allows interfacing of both Telescopic sights w/MIL-STD rings and Trijicon ACOG aiming...

                    GDI MS6-OSM Trijicon MRO Lower 3rd Co-Witness GDI, MS6-OSM, Trijicon, MRO, Lower, 3rd, Co-Witness, MS6M,
                    Price: $210.00
                    Availability: CALL FOR AVAILABILITY | (916)-670-1103
                    Global Defense Initiatives Item #: GDI-MS6-OSM -

                      Global Defense Initiatives MS6-OSM Trijicon MRO Lower 3rd Co-Witness MS6MMS6-OSM (Optical Sight Mount) Sight mount for Trijicon MRO reflex sights: M4/M16 Compatible Lower 3rd Co-witness: Front sight post tip in lower 3rd of sight picture

                      GDI MT5-OSM Aimpoint Micro Co-Witness Global Defense Initiatives, GDI, MT5-OSM, Aimpoint, Micro, Co, Witness, MT5M,
                      Price: $210.00
                      Availability: In Stock
                      Global Defense Initiatives Item #: GDI-MT5M -

                        Global Defense Initiatives MT5-OSM Aimpoint Micro Co-WitnessMT5MMT5-OSM (Optical Sight Mount) Sight mount for Aimpoint Micro T-1, H-1, and R-1 Red Dot reflex sights: M4/M16 Compatible Standard Co-Witness: Front sight post tip in-line w/red dot Materials: CNC Machined Aerospace Grade Aluminum Stainless SteelFinish: MIL-SPEC Type III Hardcoat Anodize ...

                        GDI MT6-OSM Aimpoint Micro Lower 3rd Co-Witness GDI, MT6-OSM, Aimpoint, Micro, Lower, 3rd, Co-Witness, MT6M,
                        Price: $210.00
                        Availability: In Stock
                        Global Defense Initiatives Item #: GDI-MT6-OSM -

                          Global Defense Initiatives MT6-OSM Aimpoint Micro Lower 3rd Co-Witness MT6MMT6-OSM (Optical Sight Mount) Sight mount for Aimpoint Micro T-1, H-1, and R-1 Red Dot reflex sights: M4/M16 Compatible Lower 3rd Co-witness: Front sight post tip in lower 3rd of sight picture