ZeroStop technology is standard, and a variety of reticles is offered. The F1 ships with a set of Nightforce's superb Ultralight titanium rings (1" center height).
SPECIFICATIONS
|
Magnification: |
3.5-15x |
|
Objective Diameter: |
50mm |
|
Exit Pupil Diameter: |
14.3mm @ 3.5x |
|
Field Of View: |
27.6ft @ 3.5x 7.3ft @ 15x |
|
Eye Relief: |
3.9in (99mm) |
|
Internal Adjustment Range: |
110moa elev. 80moa wind. |
|
Click Value: |
1/10 Mil Radian |
|
Tube Diameter: |
30mm (1.18in) |
|
Ocular Diameter: |
36mm |
|
Mounting Length: |
6.1in |
|
Weight: |
30oz |
|
Overall Length: |
14.7in |
|
Reticles: |
Mil-Dot |
All MIL-SPEC NF NXS riflescopes endure:
Test 1. Simulating depth test of 100 feet, this test exceed current U.S. military specification requirements by up to 25%. (Not a big deal for most Shooter)
Test 2: The internal components are test against the effects of rapid temperature and pressure fluctuations encountered by HALO (High Altitude, Low Opening). (Not a big deal for most Shooter)
Test the will apply to the rest of us are below... If the tests above apply to you I have one thing to say. LUCKY…
All MIL-SPEC riflescopes undergo twice the amount of impact testing of a commercial NXS riflescope to ensure they can withstand abuse from the battlefield.
All MIL-SPEC riflescopes are 100% inspected both before and after environmental testing procedures to ensure consistency, repeatability, and to prove the integrity of the product at every stage.
Mechanical components on all MIL-SPEC riflescopes are assembled in a permanent fashion to maintain product integrity when exposed to extreme shock and high frequency vibrations, such as full auto-fire and explosive environments.
All optical elements are bedded in a proprietary Mil-Spec bonding agent (no glass-to-metal contact).
Tracking accuracy, reticle tilt, maximum adjustment range, between-power deviation and adjustment backlash are all of higher standards on a MIL-SPEC riflescope. They exceed the strict specifications of our commercial NXS product line, and are held to tolerances unmatched by any other scope manufacturer.
OPTICAL QUALITY & PERFORMANCE
All MIL-SPEC riflescopes are built using only the best optical elements chosen from each lot received from our lens element suppliers.
All air-to-glass surfaces receive our proprietary broadband multi-coating, exceeding the toughest Mil-Spec abrasion test.
Resolution, contrast, color correction and reticle sub tension are maintained at levels up to 5% higher than our commercial products.
Please log in to write a review.
- Meopta Meostar 1-4x22 ZD (Mount not included) (Category: Meopta)
- 3.4x28 M20/M249 RET. (Category: Elcan)
- CMC Trigger 91501 (Category: CMC)
- Daniel Defense AR10 Lite Rail 12.0 (Category: Daniel Defense Rails)
Last Updated: Friday, 18 May 2012 09:55


